UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20919
                        
                            Issued:1996-05-02
                    
                            Revised:2012-04-23
                    
                            Style
                            20919
                        
                            Bonded flat ribbon cable.
                    
			Rating105 deg C, 150 Vac, Horizontal flame.
		
			Conductorsolid or stranded round.
		
			InsulationPVC, 6 mils min. ave., 5 mils min. at any point.
		
			AssemblyTwo to 100 insulated singles or twisted pair or triads laid parallel in one plane, retained by heat or film melt bonded sections at random intervals from 0.125 to 100 in. apart, with or without PVC bands on one side of the cables in between the heat or film melt bonded sections. Width of heat or film melt bonded sections min. 0.125 inch. PVC film or polyester/PVC laminated film may be heat bonded on one side of cable.
		
			ShieldOptional.
		
			CoveringOptional.Extruded PVC, 5 mils min. at any point, 80 mils maximum.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Electronic Equipment, such as computers and electric business machines.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20919	Issued:1996-05-02
			Revised:2012-04-23


Rating	105 deg C, 150 Vac, Horizontal flame.

Conductor	solid or stranded round.

Insulation	PVC, 6 mils min. ave., 5 mils min. at any point.

Assembly	Two to 100 insulated singles or twisted pair or triads laid parallel in one plane, retained by heat or film melt bonded sections at random intervals from 0.125 to 100 in. apart, with or without PVC bands on one side of the cables in between the heat or film melt bonded sections. Width of heat or film melt bonded sections min. 0.125 inch. PVC film or polyester/PVC laminated film may be heat bonded on one side of cable.

Shield	Optional.

Covering	Optional.Extruded PVC, 5 mils min. at any point, 80 mils maximum.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Electronic Equipment, such as computers and electric business machines.