UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2093
                        
                            Issued:1959-05-01
                    
                            Revised:2018-03-07
                    
                            Style
                            2093
                        
                            Multiple-conductor cable using non-intergral jacket
                    
			Rating60 deg C, 300 Vac, Horizontal flame.
		
			Conductor30 AWG - 16 AWG solid or stranded round, tinned or bare copper.
		
			InsulationPE or FRPE, 15 mils min average, 13 mils minimum at any point.
		
			AssemblyThree individually insulated wires cabled together. The length of lay of the twisted wires is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be 10 mils of extruded PVC, a fibrous wrap serving or braid, paper; nylon; oriented polyethylene terephthalate or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors or over the shield, if provided.
		
			ShieldOptional.
		
			JacketPVC, 15 mils min average, 12 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.  Tabs may indicate the following:  "600 Volts peak for Electronic Use Only."
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2093	Issued:1959-05-01
			Revised:2018-03-07


Rating	60 deg C, 300 Vac, Horizontal flame.

Conductor	30 AWG - 16 AWG solid or stranded round, tinned or bare copper.

Insulation	PE or FRPE, 15 mils min average, 13 mils minimum at any point.

Assembly	Three individually insulated wires cabled together. The length of lay of the twisted wires is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be 10 mils of extruded PVC, a fibrous wrap serving or braid, paper; nylon; oriented polyethylene terephthalate or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors or over the shield, if provided.

Shield	Optional.

Jacket	PVC, 15 mils min average, 12 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment. Tabs may indicate the following: "600 Volts peak for Electronic Use Only."