UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20937
                        
                            Issued:1996-08-16
                    
                            Revised:2012-04-02
                    
                            Style
                            20937
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 30 Vac, Cable flame.
		
			Conductor40 AWG min, solid or stranded.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure except that styles rated 30 Volts for Class 2 operation may not be used.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size.
		
			CoveringOptional. Extruded PVC, 6 mil or heavier may be extruded over each twisted pair, groups of conductors, or the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded TPU.
		
			Dia of cable under jacket in inchesMinimum average milsMinimum at any point mils
		
			0.700 or less3024
		
			0.701-1.0004536
		
			1.001-1.5006048
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20937	Issued:1996-08-16
			Revised:2012-04-02


Rating	80 deg C, 30 Vac, Cable flame.

Conductor	40 AWG min, solid or stranded.

Insulation	Labeled or complying with Manufacturer's AWM Procedure except that styles rated 30 Volts for Class 2 operation may not be used.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size.

Covering	Optional. Extruded PVC, 6 mil or heavier may be extruded over each twisted pair, groups of conductors, or the conductor assembly.

Shield	Optional.

Jacket	Extruded TPU.
	Dia of cable under jacket in inches	Minimum average mils	Minimum at any point mils
	0.700 or less	30	24
	0.701-1.000	45	36
	1.001-1.500	60	48

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment.