UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20938
                        
                            Issued:1996-08-16
                    
                            Revised:2019-11-07
                    
                            Style
                            20938
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 125 Vac, Cable flame.
		
			Conductor40AWG - 9 AWG, solid or stranded.
		
			InsulationLabeled or complying with Manufacturer's Conductors AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded TPU
		
			major dia. in inches
		
			0.700 or less30 mils min average24 mils minimum at any point
		
			0.701 to 1.000 dia45 avg36 min
		
			1.001 to 1.500 dia60 avg48 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20938	Issued:1996-08-16
			Revised:2019-11-07


Rating	80 deg C, 125 Vac, Cable flame.

Conductor	40AWG - 9 AWG, solid or stranded.

Insulation	Labeled or complying with Manufacturer's Conductors AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Shield	Optional.

Jacket	Extruded TPU
	major dia. in inches
	0.700 or less	30 mils min average	24 mils minimum at any point
	0.701 to 1.000 dia	45 avg	36 min
	1.001 to 1.500 dia	60 avg	48 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of electronic equipment.