UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20939
                        
                            Issued:1996-08-16
                    
                            Revised:2012-07-27
                    
                            Style
                            20939
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 600 Vac, Cable flame.
		
			InsulationLabeled or complying with Manufacture'a AWM Procedure  No. 40AWG min..
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional - A 6 mils or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded TPU.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch60 mils48 mils
		
			1.001-1.500 inch80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20939	Issued:1996-08-16
			Revised:2012-07-27


Rating	80 deg C, 600 Vac, Cable flame.

Insulation	Labeled or complying with Manufacture'a AWM Procedure No. 40AWG min..

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional - A 6 mils or heavier PVC covering may be extruded over the conductor assembly.

Jacket	Extruded TPU.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	60 mils	48 mils
	1.001-1.500 inch	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external wiring.