UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20940
                        
                            Issued:1996-08-21
                    
                            Revised:2022-03-30
                    
                            Style
                            20940
                        
                            Multiple conductor cable using non-integral jacket.
                    
			Rating80 deg C, 600, 1000 Vac, Horizontal flame.
		
			Conductor32 AWG minimum. solid or stranded round.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional. A 6 mil or heavier covering may be extruded over the conductor assembly.
		
			JacketExtruded TPU.
		
			Diameter of cable under jacketMinimum average thicknessMinimum thickness at any point
		
			0.350 inch or less30 mils24 mils
		
			0.351-0.700 inch45 mils36 mils
		
			0.701-1.000 inch60 mils48 mils
		
			1.001-1.500 inch80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment and appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20940	Issued:1996-08-21
			Revised:2022-03-30


Rating	80 deg C, 600, 1000 Vac, Horizontal flame.

Conductor	32 AWG minimum. solid or stranded round.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. A 6 mil or heavier covering may be extruded over the conductor assembly.

Jacket	Extruded TPU.
	Diameter of cable under jacket	Minimum average thickness	Minimum thickness at any point
	0.350 inch or less	30 mils	24 mils
	0.351-0.700 inch	45 mils	36 mils
	0.701-1.000 inch	60 mils	48 mils
	1.001-1.500 inch	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment and appliances.