UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20941
                        
                            Issued:1996-09-11
                    
                            Revised:2020-11-05
                    
                            Style
                            20941
                        
                            Bonded or Laminated Extruded  / Non-Extruded Flat Ribbon Cable
                    
			Rating105 deg C, 90 Vac, Horizontal flame.
		
			Conductor40 AWG - 12 AWG solid or stranded round or flat, tinned or bare.
		
			Insulation(1) On each side of the conductors, 0.4 mils minimum thickness PET, PETP film bonded to 1.0 mil thick irradiated flame retardant polyolefin (XLFRPO) adhesive; or (2) 0.4 mils minimum thickness  PET, PETP film bonded each side with 0.5 mils polyester adhesive. Minimum 8 mils insulation width on outside edges of conductors and 3 mils minimum insulation width between adjacent conductors. Length of insulated conductors not specified.
		
			AssemblyTwo to 150 conductors, straight or irregular, laid parallel in one plane.

			Shield(Optional) Metal faced polyester or polyphenylene sulfide tape.
		
			Drain WireDrain wire - optional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20941	Issued:1996-09-11
			Revised:2020-11-05


Rating	105 deg C, 90 Vac, Horizontal flame.

Conductor	40 AWG - 12 AWG solid or stranded round or flat, tinned or bare.

Insulation	(1) On each side of the conductors, 0.4 mils minimum thickness PET, PETP film bonded to 1.0 mil thick irradiated flame retardant polyolefin (XLFRPO) adhesive; or (2) 0.4 mils minimum thickness PET, PETP film bonded each side with 0.5 mils polyester adhesive. Minimum 8 mils insulation width on outside edges of conductors and 3 mils minimum insulation width between adjacent conductors. Length of insulated conductors not specified.

Assembly	Two to 150 conductors, straight or irregular, laid parallel in one plane.

Shield	(Optional) Metal faced polyester or polyphenylene sulfide tape.

Drain Wire	Drain wire - optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electronic equipment.