UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20943
                        
                            Issued:1996-10-25
                    
                            Revised:2012-03-22
                    
                            Style
                            20943
                        
                            Parallel Cable with Extruded Integral Insulation and Jacket
                    
			Rating105 deg C, 600 Vac, Horizontal flame.
		
			Conductor40 AWG - 12 AWG Flat, 0.8 - 10.0 mils thick, 10-100 mils wide.
		
			InsulationPET, 2 mils minimum average thickness, integral with Jacket.
		
			AssemblyTwo to 150 conductors laid parallel in one plane. On each side of the conductors, irradiated 0.5 mils minimum thickness of flame retardant polyolefin (FRPO) adhesive bonded to 1.6 mils minimum thickness of biaxially oriented PET (PETP) film. Minimum 20 mils insulation width on outside edges of conductors and 20 mils minimum insulation width between adjacent conductors. Length of insulated conductors not specified.
		
			ShieldOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20943	Issued:1996-10-25
			Revised:2012-03-22


Rating	105 deg C, 600 Vac, Horizontal flame.

Conductor	40 AWG - 12 AWG Flat, 0.8 - 10.0 mils thick, 10-100 mils wide.

Insulation	PET, 2 mils minimum average thickness, integral with Jacket.

Assembly	Two to 150 conductors laid parallel in one plane. On each side of the conductors, irradiated 0.5 mils minimum thickness of flame retardant polyolefin (FRPO) adhesive bonded to 1.6 mils minimum thickness of biaxially oriented PET (PETP) film. Minimum 20 mils insulation width on outside edges of conductors and 20 mils minimum insulation width between adjacent conductors. Length of insulated conductors not specified.

Shield	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.