UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20949
                        
                            Issued:1997-03-04
                    
                            Revised:2013-02-21
                    
                            Style
                            20949
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating105 deg C, 600 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated wires or group of individually insulated wires cabled together. The length of lay of the twisted wires or groups of wire is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethyelene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups or conductors. May be formed in a round or flat assembly.
		
			JacketExtruded PVC.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.315 inch or less40 mils32 mils
		
			0.32-0.51 inch46 mils41 mils
		
			0.52-0.67 inch53 mils47 mils
		
			0.68-0.87 inch64 mils57 mils
		
			0.88-1.02 inch74 mils66 mils
		
			1.03-1.22 inches82 mils72 mils
		
			1.23 inches and larger92 mils82 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal or external wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20949	Issued:1997-03-04
			Revised:2013-02-21


Rating	105 deg C, 600 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more individually insulated wires or group of individually insulated wires cabled together. The length of lay of the twisted wires or groups of wire is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethyelene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups or conductors. May be formed in a round or flat assembly.

Jacket	Extruded PVC.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.315 inch or less	40 mils	32 mils
	0.32-0.51 inch	46 mils	41 mils
	0.52-0.67 inch	53 mils	47 mils
	0.68-0.87 inch	64 mils	57 mils
	0.88-1.02 inch	74 mils	66 mils
	1.03-1.22 inches	82 mils	72 mils
	1.23 inches and larger	92 mils	82 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal or external wiring of electronic equipment.