UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20955
                        
                            Issued:1997-03-25
                    
                            Revised:2011-08-12
                    
                            Style
                            20955
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket
                    
			Rating105 deg C, 300 Vac, Cable flame, 60 deg C or 80 deg C Oil. Optional - Oil Resistant.
		
			InsulationExtruded TPE, 18-12 AWG, 30 mils minimum average thickness, 27 mils minimum thickness at any point, 10 AWG, 45 mils minimum average thickness, 40 mils minimum thickness at any point.
		
			Conductor18 AWG - 10 AWG solid or stranded round, tinned or bare copper.
		
			AssemblyTwo through 60 individually insulated conductors or groups of insulated conductors to form a round cable. The length of lay of the twisted conductors or groups is not, shall be in accordance with Type SE Cord under the Standard for Flexible Cord and Fixture Wire, UL 62. Fillers may be used in a cable but are not required. Barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; PET; or thermoplastic-tape wrap.
		
			JacketExtruded TPE
		
			diameter of core assembly under jacketminimum average thicknessminimum thickness at any point
		
			0.700 or less inch30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment where the acceptability of the combination is to be accepted by Underwriters Laboratories.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20955	Issued:1997-03-25
			Revised:2011-08-12


Rating	105 deg C, 300 Vac, Cable flame, 60 deg C or 80 deg C Oil. Optional - Oil Resistant.

Insulation	Extruded TPE, 18-12 AWG, 30 mils minimum average thickness, 27 mils minimum thickness at any point, 10 AWG, 45 mils minimum average thickness, 40 mils minimum thickness at any point.

Conductor	18 AWG - 10 AWG solid or stranded round, tinned or bare copper.

Assembly	Two through 60 individually insulated conductors or groups of insulated conductors to form a round cable. The length of lay of the twisted conductors or groups is not, shall be in accordance with Type SE Cord under the Standard for Flexible Cord and Fixture Wire, UL 62. Fillers may be used in a cable but are not required. Barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; PET; or thermoplastic-tape wrap.

Jacket	Extruded TPE
	diameter of core assembly under jacket	minimum average thickness	minimum thickness at any point
	0.700 or less inch	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment where the acceptability of the combination is to be accepted by Underwriters Laboratories.