UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20965
                        
                            Issued:1997-07-02
                    
                            Revised:2012-04-19
                    
                            Style
                            20965
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating105 deg C, 600 Vac, FT2 flame, 60 deg C Wet, 60 deg C Oil.
		
			InsulationLabeled or complying with manufacturer's AWM Conductors.
		
			AssemblyTwo or more insulated conductors. Braid may be optionally applied over conductors and/or assemblies. Filler may be employed in the interstices to make the cable round.
		
			ShieldAL/Polyester tape shield with or without drain wire, in contact with the metal portion of the tape or polyester tape cabled around two or more 24 AWG - 16 AWG insulated conductors.
		
			CoveringPaper tape, 2 mils maximum thickness, may be employed under the overall jacket.
		
			JacketExtruded PVC or extruded TPE.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.500 inch or less80 mils64 mils
		
			0.501 - 0.750 inch95 mils76 mils
		
			0.751-1.000 inch110 mils88 mils
		
			1.001-1.500 inch125 mils100 mils
		
			1.501-2.000 inch140 mils112 mils
		
			2.01-2.50 inch155 mils124 mils
		
			2.51-3.00 inch170 mils136 mils
		
			3.01 inch and largerto be determined by investigation
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSpecial Use Outdoor power supply cord; 105 deg C dry, 60 deg C wet and 60 deg C oil where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20965	Issued:1997-07-02
			Revised:2012-04-19


Rating	105 deg C, 600 Vac, FT2 flame, 60 deg C Wet, 60 deg C Oil.

Insulation	Labeled or complying with manufacturer's AWM Conductors.

Assembly	Two or more insulated conductors. Braid may be optionally applied over conductors and/or assemblies. Filler may be employed in the interstices to make the cable round.

Shield	AL/Polyester tape shield with or without drain wire, in contact with the metal portion of the tape or polyester tape cabled around two or more 24 AWG - 16 AWG insulated conductors.

Covering	Paper tape, 2 mils maximum thickness, may be employed under the overall jacket.

Jacket	Extruded PVC or extruded TPE.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.500 inch or less	80 mils	64 mils
	0.501 - 0.750 inch	95 mils	76 mils
	0.751-1.000 inch	110 mils	88 mils
	1.001-1.500 inch	125 mils	100 mils
	1.501-2.000 inch	140 mils	112 mils
	2.01-2.50 inch	155 mils	124 mils
	2.51-3.00 inch	170 mils	136 mils
	3.01 inch and larger	to be determined by investigation

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Special Use Outdoor power supply cord; 105 deg C dry, 60 deg C wet and 60 deg C oil where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.