UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20969
                        
                            Issued:1997-08-01
                    
                            Revised:2019-11-07
                    
                            Style
                            20969
                        
                            Multiple conductor with extruded insulation.
                    
			Rating105 deg C, 300 Vac, Horizontal flame, Moisture Resistant 60 deg C.
		
			Conductor24 AWG - 10 AWG solid or stranded round.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyCable consists of an overall jacket, two or more 18-10 AWG conductors and an optional member consisting of an optional TPE or PVC jacket, an aluminum polyester with optional drain wire in contact with the metal portion of the tape or polyester tape cabled around two or more 24-16 AWG insulated conductors, an optional fiber optic conductor. Braid may be optionally applied over conductors and/or assemblies.
		
			ShieldOptional.
		
			CoveringOptional.
		
			BraidOptional.
		
			JacketPVC or TPE
		
			dia. in inches
		
			0.700 or less30 mils min average
		
			0.701-1.000 dia45 avg
		
			1.001-1.600 dia60 avg
		
			1.601-2.500 dia80 avg
		
			2.501-4.000 dia110 avg
		
			4.001 dia and larger140 avg
		
			Misc.Separator - Paper, 2 mils thick maximum may be employed under the overall jacket. Fillers - Kevlar, Jute or Polypropylene fillers may be employed in the interstices to make the cable round.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSpecial use outdoor power supply cord; 105 deg C dry, 60 deg C wet and 60 deg C oil where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20969	Issued:1997-08-01
			Revised:2019-11-07


Rating	105 deg C, 300 Vac, Horizontal flame, Moisture Resistant 60 deg C.

Conductor	24 AWG - 10 AWG solid or stranded round.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Cable consists of an overall jacket, two or more 18-10 AWG conductors and an optional member consisting of an optional TPE or PVC jacket, an aluminum polyester with optional drain wire in contact with the metal portion of the tape or polyester tape cabled around two or more 24-16 AWG insulated conductors, an optional fiber optic conductor. Braid may be optionally applied over conductors and/or assemblies.

Shield	Optional.

Covering	Optional.

Braid	Optional.

Jacket	PVC or TPE
	dia. in inches
	0.700 or less	30 mils min average
	0.701-1.000 dia	45 avg
	1.001-1.600 dia	60 avg
	1.601-2.500 dia	80 avg
	2.501-4.000 dia	110 avg
	4.001 dia and larger	140 avg

Misc.	Separator - Paper, 2 mils thick maximum may be employed under the overall jacket. Fillers - Kevlar, Jute or Polypropylene fillers may be employed in the interstices to make the cable round.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Special use outdoor power supply cord; 105 deg C dry, 60 deg C wet and 60 deg C oil where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.