UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20978
                        
                            Issued:1998-01-29
                    
                            Revised:2021-09-20
                    
                            Style
                            20978
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 300 Vac, Use No. 1 - Horizontal Flame, Use No. 2 - Cable Flame
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together or groups may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional. A 15 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded TPU
		
			diameter of assembly under jacket in inchesmils min. averagemils min. at any point
		
			0.700 or less3024
		
			0.701-1.0006048
		
			1.001-1.5008064
		
			1.501-2.50011088
		
			2.501 and larger140112
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseUse No. 1 for Internal Wiring or Use No. 2 for External Interconnection of Electronic Equipment (such as desk-type calculators, dictating machines, or X-Ray Equipment).
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20978	Issued:1998-01-29
			Revised:2021-09-20


Rating	80 deg C, 300 Vac, Use No. 1 - Horizontal Flame, Use No. 2 - Cable Flame

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Two or more twisted singles or groups of twisted singles twisted together or groups may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional. A 15 mil or heavier PVC covering may be extruded over the conductor assembly.

Jacket	Extruded TPU
	diameter of assembly under jacket in inches	mils min. average	mils min. at any point
	0.700 or less	30	24
	0.701-1.000	60	48
	1.001-1.500	80	64
	1.501-2.500	110	88
	2.501 and larger	140	112

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Use No. 1 for Internal Wiring or Use No. 2 for External Interconnection of Electronic Equipment (such as desk-type calculators, dictating machines, or X-Ray Equipment).