UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20979
                        
                            Issued:1998-01-29
                    
                            Revised:2019-11-07
                    
                            Style
                            20979
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 600 Vac, Horizontal flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together or groups may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional. A 15 mil or heavier extruded PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PUR
		
			dia. in inches
		
			0.700 or less30 mils min average24 mils minimum at any point
		
			0.701-1.000 dia60 avg48 min
		
			1.001-1.500 dia80 avg64 min
		
			1.501-2.500 dia110 avg88 min
		
			2.501 dia and larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of External Interconnection of Electronic Equipment (such as desk-type calculators, dictating machines, or X-Ray Equipment).
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20979	Issued:1998-01-29
			Revised:2019-11-07


Rating	80 deg C, 600 Vac, Horizontal flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more twisted singles or groups of twisted singles twisted together or groups may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional. A 15 mil or heavier extruded PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PUR
	dia. in inches
	0.700 or less	30 mils min average	24 mils minimum at any point
	0.701-1.000 dia	60 avg	48 min
	1.001-1.500 dia	80 avg	64 min
	1.501-2.500 dia	110 avg	88 min
	2.501 dia and larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of External Interconnection of Electronic Equipment (such as desk-type calculators, dictating machines, or X-Ray Equipment).