UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20982
                        
                            Issued:1998-03-10
                    
                            Revised:2012-04-23
                    
                            Style
                            20982
                        
                            Laminated flat ribbon cable
                    
			Rating105 deg C, 2000 Vac, Horizontal flame.
		
			Conductor40 AWG - 12 AWG Flat, 0.8 - 10.0 mils thick, 10 - 100 mils wide, material not specified.
		
			InsulationPET, PETP, 4.5 mils min average.
		
			AssemblyTwo to 150 conductors straight or irregular parallel in one plane. One each side of the conductors, irradiated flame retardant polyolefin adhesive bonded to biaxially oriented PETP film, combined minimum average thickness of 4.5 mils. Minimum 30 mils insulation width on outside edges of conductors and 60 mils minimum insulation width between adjacent conductors. Length of insulated conductors not specified.
		
			ShieldOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20982	Issued:1998-03-10
			Revised:2012-04-23


Rating	105 deg C, 2000 Vac, Horizontal flame.

Conductor	40 AWG - 12 AWG Flat, 0.8 - 10.0 mils thick, 10 - 100 mils wide, material not specified.

Insulation	PET, PETP, 4.5 mils min average.

Assembly	Two to 150 conductors straight or irregular parallel in one plane. One each side of the conductors, irradiated flame retardant polyolefin adhesive bonded to biaxially oriented PETP film, combined minimum average thickness of 4.5 mils. Minimum 30 mils insulation width on outside edges of conductors and 60 mils minimum insulation width between adjacent conductors. Length of insulated conductors not specified.

Shield	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.