UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20986
                        
                            Issued:1998-03-09
                    
                            Revised:2011-07-27
                    
                            Style
                            20986
                        
                            Laminated Flat Ribbon Cable.
                    
			Rating105 deg C, 60 Vac, Horizontal flame.
		
			ConductorCopper foil, 1.0-10.0 mils thickness, 10-100 mils wide.
		
			InsulationPET film, 0.5 mil minimum thickness each side with 0.8 mil minimum polyester adhesive. 6 mils minimum edge width and 4 mils minimum distance between conductors.
		
			AssemblyTwo to 150 conductors laid straight parallel in one plane, with optional shield, optional drain wire, optional inner covering and optional outer covering.
		
			ShieldOptional. Metal faced polyester tape.
		
			CoveringInner - (Optional) Polyester film, 0.02-4.0 mils bonded to cable with a polyester adhesive. Outer - (Optional) Paper film, 1.0-10.0 mils attached to cable with acrylic adhesive.
		
			Misc.Drain wire - optional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20986	Issued:1998-03-09
			Revised:2011-07-27


Rating	105 deg C, 60 Vac, Horizontal flame.

Conductor	Copper foil, 1.0-10.0 mils thickness, 10-100 mils wide.

Insulation	PET film, 0.5 mil minimum thickness each side with 0.8 mil minimum polyester adhesive. 6 mils minimum edge width and 4 mils minimum distance between conductors.

Assembly	Two to 150 conductors laid straight parallel in one plane, with optional shield, optional drain wire, optional inner covering and optional outer covering.

Shield	Optional. Metal faced polyester tape.

Covering	Inner - (Optional) Polyester film, 0.02-4.0 mils bonded to cable with a polyester adhesive. Outer - (Optional) Paper film, 1.0-10.0 mils attached to cable with acrylic adhesive.

Misc.	Drain wire - optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electronic equipment.