UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20989
                        
                            Issued:1998-03-25
                    
                            Revised:2012-05-30
                    
                            Style
                            20989
                        
                            Multiple-Conductor Cable using Non-Integral Extruded Jacket
                    
			Rating105 deg C, 300 Vac, Horizontal Flame.
		
			Conductor22 AWG - 14 AWG, stranded. Conductive Core - Over the conductor is an extruded semi-conductive high temperature thermoplastic or thermoset covering.
		
			InsulationExtruded FEP, extruded PVDF, extruded TPE or extruded XLPE, 22 mils minimum average, 20 mils minimum at any point.
		
			AssemblyTwo to three conductive cores with insulation, optional shield, inner jacket and outer jacket, lad paralleled.
		
			ShieldOptional.
		
			Inner JacketExtruded XLPE or extruded TPE, 25 mils minimum average, 20 mils minimum at any point, or extruded PVDF or extruded FEP, 19 mils minimum average, 15 mils minimum at any point.
		
			Outer JacketExtruded FEP, 12 mils minimum average, 10 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UsePipe heating cable where the acceptability of the combination is to be determined by UL LLC.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20989	Issued:1998-03-25
			Revised:2012-05-30


Rating	105 deg C, 300 Vac, Horizontal Flame.

Conductor	22 AWG - 14 AWG, stranded. Conductive Core - Over the conductor is an extruded semi-conductive high temperature thermoplastic or thermoset covering.

Insulation	Extruded FEP, extruded PVDF, extruded TPE or extruded XLPE, 22 mils minimum average, 20 mils minimum at any point.

Assembly	Two to three conductive cores with insulation, optional shield, inner jacket and outer jacket, lad paralleled.

Shield	Optional.

Inner Jacket	Extruded XLPE or extruded TPE, 25 mils minimum average, 20 mils minimum at any point, or extruded PVDF or extruded FEP, 19 mils minimum average, 15 mils minimum at any point.

Outer Jacket	Extruded FEP, 12 mils minimum average, 10 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Pipe heating cable where the acceptability of the combination is to be determined by UL LLC.