UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20994
                        
                            Issued:1998-04-29
                    
                            Revised:2012-01-12
                    
                            Style
                            20994
                        
                            Bonded or laminated flat ribbon cable.
                    
			Rating105 deg C, 2000 Vac, Horizontal flame.
		
			Conductor40 AWG - 12 AWG Flat, material not specified, 0.8 - 10.0 mils thick, 10 - 100 mils wide.
		
			InsulationPOLYIMIDE, 2.2 mils min average.
		
			AssemblyTwo to 150 conductors straight or irregular parallel in one plane. One each side of the conductors, thermosetting adhesive bonded to polyimide film, combined minimum average thickness of 2.2 mils. Minimum 24 mils insulation width on outside edges of conductors and 50 mils minimum insulation width between adjacent conductors. Length of insulated conductors not specified.
		
			ShieldOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.Tags may also indicate the following:2800 V peak - for electronic use only.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20994	Issued:1998-04-29
			Revised:2012-01-12


Rating	105 deg C, 2000 Vac, Horizontal flame.

Conductor	40 AWG - 12 AWG Flat, material not specified, 0.8 - 10.0 mils thick, 10 - 100 mils wide.

Insulation	POLYIMIDE, 2.2 mils min average.

Assembly	Two to 150 conductors straight or irregular parallel in one plane. One each side of the conductors, thermosetting adhesive bonded to polyimide film, combined minimum average thickness of 2.2 mils. Minimum 24 mils insulation width on outside edges of conductors and 50 mils minimum insulation width between adjacent conductors. Length of insulated conductors not specified.

Shield	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.Tags may also indicate the following:2800 V peak - for electronic use only.