UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21001
                        
                            Issued:1998-09-08
                    
                            Revised:2015-09-28
                    
                            Style
                            21001
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 or 80 deg C, Voltage Not Specified, Cable Flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			JacketExtruded THV or ETFE or FEP or PFA or PTFE, TFE
		
			*Diameter of cable under jacket in inchesmils minimum averagemils minimum at any point
		
			0.500 or less1814
		
			0.501-0.7002520
		
			0.701-1.0003528
		
			1.001-1.5004536
		
			1.501-2.5006048
		
			2.501-4.0008064
		
			4.001 dia and larger11088
		
			*Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring or Internal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21001	Issued:1998-09-08
			Revised:2015-09-28


Rating	60 or 80 deg C, Voltage Not Specified, Cable Flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Jacket	Extruded THV or ETFE or FEP or PFA or PTFE, TFE
	*Diameter of cable under jacket in inches	mils minimum average	mils minimum at any point
	0.500 or less	18	14
	0.501-0.700	25	20
	0.701-1.000	35	28
	1.001-1.500	45	36
	1.501-2.500	60	48
	2.501-4.000	80	64
	4.001 dia and larger	110	88
	*Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring or Internal wiring.