UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21011
                        
                            Issued:1998-10-15
                    
                            Revised:2019-11-07
                    
                            Style
                            21011
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating150 deg C(insulation), 110 deg C(jacket), 600 Vac, Cable flame.
		
			Conductor18 AWG - 10 AWG solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complying with manufacturer's AWM procedure, 20 mils min average, 18 mils minimum at any point.
		
			AssemblyConsists of two or three conductors, twisted together. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			JacketPVC
		
			dia. in inches
		
			0.425 or less45 mils min average36 mils minimum at any point
		
			0.426-0.700 dia60 avg48 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of Lighting Fixtures where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21011	Issued:1998-10-15
			Revised:2019-11-07


Rating	150 deg C(insulation), 110 deg C(jacket), 600 Vac, Cable flame.

Conductor	18 AWG - 10 AWG solid or stranded round, tinned or bare copper.

Insulation	Labeled or complying with manufacturer's AWM procedure, 20 mils min average, 18 mils minimum at any point.

Assembly	Consists of two or three conductors, twisted together. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Jacket	PVC
	dia. in inches
	0.425 or less	45 mils min average	36 mils minimum at any point
	0.426-0.700 dia	60 avg	48 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of Lighting Fixtures where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.