UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21019
                        
                            Issued:1999-02-01
                    
                            Revised:2012-04-02
                    
                            Style
                            21019
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating150 deg C, 250 Vac, Horizontal flame.
		
			Conductor36 AWG - 20 AWG, solid or stranded.
		
			InsulationExtruded PTFE, 6 mils minimum average thickness, 5 mils minimum thickness at any point.
		
			AssemblyTwo or more insulated singles optionally twisted around teflon filler or breather tube and with optional inner jacket, optional shield and outer jacket. Fillers may be used to form round cable.
		
			Inner JacketOptional. Extruded SR, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			ShieldOptional.
		
			JacketExtruded SR.
		
			Dia of cable under jacketMin. Avg. Thickness milsMin. thickness at any point mils
		
			0.200 or less3024
		
			0.201-0.3004536
		
			0.301-0.4006048
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21019	Issued:1999-02-01
			Revised:2012-04-02


Rating	150 deg C, 250 Vac, Horizontal flame.

Conductor	36 AWG - 20 AWG, solid or stranded.

Insulation	Extruded PTFE, 6 mils minimum average thickness, 5 mils minimum thickness at any point.

Assembly	Two or more insulated singles optionally twisted around teflon filler or breather tube and with optional inner jacket, optional shield and outer jacket. Fillers may be used to form round cable.

Inner Jacket	Optional. Extruded SR, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Shield	Optional.

Jacket	Extruded SR.
	Dia of cable under jacket	Min. Avg. Thickness mils	Min. thickness at any point mils
	0.200 or less	30	24
	0.201-0.300	45	36
	0.301-0.400	60	48

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.