UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21021
                        
                            Issued:1999-02-18
                    
                            Revised:2012-04-18
                    
                            Style
                            21021
                        
                            Bonded flat ribbon cable.
                    
			Rating105 deg C, 30 Vac, Horizontal flame.
		
			Conductor36 AWG - 26 AWG, solid or stranded.
		
			InsulationExtruded TPE, 4 mils minimum thickness at any point.
		
			AssemblyTwo through 150 insulated singles or twisted pair or triads laid parallel in one plane, retained by heat or film melt bonded section at random intervals up 2 to 100 inch apart, or along the complete length of cable, with or without PVC bands on one side of the cables in between the heat or film melt bonded sections. Width of heat or film melt bonded sections min 1 inch. PVC film, Polyester, Polyester/PVC laminated film may be heat bonded on one or both sides of cable.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21021	Issued:1999-02-18
			Revised:2012-04-18


Rating	105 deg C, 30 Vac, Horizontal flame.

Conductor	36 AWG - 26 AWG, solid or stranded.

Insulation	Extruded TPE, 4 mils minimum thickness at any point.

Assembly	Two through 150 insulated singles or twisted pair or triads laid parallel in one plane, retained by heat or film melt bonded section at random intervals up 2 to 100 inch apart, or along the complete length of cable, with or without PVC bands on one side of the cables in between the heat or film melt bonded sections. Width of heat or film melt bonded sections min 1 inch. PVC film, Polyester, Polyester/PVC laminated film may be heat bonded on one or both sides of cable.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.