UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21022
                        
                            Issued:1999-03-30
                    
                            Revised:2012-11-15
                    
                            Style
                            21022
                        
                            Parallel Cable with Extruded Integral Insulation and Jacket
                    
			Rating60, 75, 90 or 105 deg C, 300 Vac, Horizontal flame.
		
			Conductor26 AWG - 16 AWG, stranded.
		
			Integral Insulation and JacketExtruded PVC, 45 mils minimum average thickness, 40 mils minimum thickness at any point before separtion, 27 mils minimum thickness at any point after separation. The center conductor shall be insulated with PVC of 15 mils minimum average thickness, 13 mils minimum thickness at any point. 40 mils minimum distance between conductors and the center conductor.
		
			AssemblyThree conductors, same as Type SPT-2. Two 18-16 AWG conductors, stranded, with 36-34 AWG strands and one 26-16 AWG conductor, stranded, with 34 AWG strands. The two 18-16 AWG conductors shall be laid parallel and the 26-16 AWG conductor shall be located between the 18-16 AWG conductors.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Appliances and Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21022	Issued:1999-03-30
			Revised:2012-11-15


Rating	60, 75, 90 or 105 deg C, 300 Vac, Horizontal flame.

Conductor	26 AWG - 16 AWG, stranded.

Integral Insulation and Jacket	Extruded PVC, 45 mils minimum average thickness, 40 mils minimum thickness at any point before separtion, 27 mils minimum thickness at any point after separation. The center conductor shall be insulated with PVC of 15 mils minimum average thickness, 13 mils minimum thickness at any point. 40 mils minimum distance between conductors and the center conductor.

Assembly	Three conductors, same as Type SPT-2. Two 18-16 AWG conductors, stranded, with 36-34 AWG strands and one 26-16 AWG conductor, stranded, with 34 AWG strands. The two 18-16 AWG conductors shall be laid parallel and the 26-16 AWG conductor shall be located between the 18-16 AWG conductors.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Appliances and Electronic Equipment.