UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21025
                        
                            Issued:1999-07-19
                    
                            Revised:2012-05-30
                    
                            Style
                            21025
                        
                            Multiple-Conductor cable using Non-Integral Extruded Jacket
                    
			Rating60 or 80 deg C, 600 Vac, Cable Flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twistedsingles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable.Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of eachassembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional. A 6 mil or heavier PVC, PE, ETFE or XLPE covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC
		
			major diameter under jacket in inchesmils minimum averagemils minimum at any point
		
			0.700 or less3024
		
			0.701-1.0004536
		
			1.001-1.5006048
		
			1.501-2.5008064
		
			2.501-4.0011088
		
			4.001 and larger140112
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or Internal Wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21025	Issued:1999-07-19
			Revised:2012-05-30


Rating	60 or 80 deg C, 600 Vac, Cable Flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pairs of groups of twistedsingles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable.Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of eachassembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. A 6 mil or heavier PVC, PE, ETFE or XLPE covering may be extruded over the conductor assembly.

Jacket	Extruded PVC
	major diameter under jacket in inches	mils minimum average	mils minimum at any point
	0.700 or less	30	24
	0.701-1.000	45	36
	1.001-1.500	60	48
	1.501-2.500	80	64
	2.501-4.00	110	88
	4.001 and larger	140	112

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or Internal Wiring of electronic equipment.