UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21027
                        
                            Issued:1999-07-19
                    
                            Revised:2019-11-07
                    
                            Style
                            21027
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 or 80 deg C, 125 Vac, Horizontal Flame (Internal), Cable Flame (External).
		
			Insulated ConductorLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more insulated singles, twisted pairs or groups of twisted insulated singles twisted together or insulated singles or groups of insulated singles may be laid parallel to form flat, oval or round cable. Length of lay not specified. Barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional - A 6 mil or heavier PVC, PE, ETFE or XLPE covering may be extruded over the insulated conductor assembly.
		
			ShieldOptional.
		
			JacketPVC
		
			major dia. in inches
		
			0.700 or less30 mils min average24 mils minimum at any point
		
			0.701-1.000 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min
		
			1.501-2.500 dia80 avg64 min
		
			2.501-4.00 dia110 avg88 min
		
			4.001 dia and larger140 avg112 min.

Extruded PVC
		
			Diameter of core assembly under jacket*, Minimum average thickness, Minimum thickness at any point; 0.700 inch or less, 30 mils, 24 mils; 0.701-1.000, 45 mils, 36 mils; 1.001-1.500, 60 mils, 48 mils; 1.501-2.500, 80 mils, 64 mils; 2.501-4.000, 110 mils, 88 mils; 4.001 inch or greater, 140 mils, 112 mils # *Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or External interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21027	Issued:1999-07-19
			Revised:2019-11-07


Rating	60 or 80 deg C, 125 Vac, Horizontal Flame (Internal), Cable Flame (External).

Insulated Conductor	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more insulated singles, twisted pairs or groups of twisted insulated singles twisted together or insulated singles or groups of insulated singles may be laid parallel to form flat, oval or round cable. Length of lay not specified. Barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional - A 6 mil or heavier PVC, PE, ETFE or XLPE covering may be extruded over the insulated conductor assembly.

Shield	Optional.

Jacket	PVC
	major dia. in inches
	0.700 or less	30 mils min average	24 mils minimum at any point
	0.701-1.000 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min
	1.501-2.500 dia	80 avg	64 min
	2.501-4.00 dia	110 avg	88 min
	4.001 dia and larger	140 avg	112 min. Extruded PVC
	Diameter of core assembly under jacket, Minimum average thickness, Minimum thickness at any point; 0.700 inch or less, 30 mils, 24 mils; 0.701-1.000, 45 mils, 36 mils; 1.001-1.500, 60 mils, 48 mils; 1.501-2.500, 80 mils, 64 mils; 2.501-4.000, 110 mils, 88 mils; 4.001 inch or greater, 140 mils, 112 mils # Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or External interconnection of electronic equipment.