UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2103
                        
                            Issued:1959-05-01
                    
                            Revised:2019-10-11
                    
                            Style
                            2103
                        
                            Multiple-Conductor Cable using Non-Integral Jacket
                    
			Rating105 deg C, 300 Vac, Horizontal flame.
		
			Conductor30 AWG - 10 AWG.
		
			InsulationLabeled or complying with manufacturer's AWM procedure having a minimum rating of 105 deg C, 300 Vac.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketExtruded PVC.
		
			Dia. of cable under jacketMinimum average thicknessMinimum thickness at any point
		
			0.350 inch or less*15 mils12 mils
		
			0.351-0.700 inch30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			*Major diameter if cable is flat or oval.
		
			BraidOptional, provided over Jacket.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2103	Issued:1959-05-01
			Revised:2019-10-11


Rating	105 deg C, 300 Vac, Horizontal flame.

Conductor	30 AWG - 10 AWG.

Insulation	Labeled or complying with manufacturer's AWM procedure having a minimum rating of 105 deg C, 300 Vac.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional.

Jacket	Extruded PVC.
	Dia. of cable under jacket	Minimum average thickness	Minimum thickness at any point
	0.350 inch or less*	15 mils	12 mils
	0.351-0.700 inch	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	*Major diameter if cable is flat or oval.

Braid	Optional, provided over Jacket.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.