UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21030
                        
                            Issued:1999-07-19
                    
                            Revised:2019-11-07
                    
                            Style
                            21030
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60, 80 deg C, 300 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twistedsingles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable.Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of eachassembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional. A 6 mil or heavier PVC, PE, ETFE or XLPE covering may be extruded over the conductor assembly.
		
			JacketPUR
		
			major dia. in inches
		
			0.700 or less30 mils min average24 mils minimum at any point
		
			0.701-1.000 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min
		
			1.501-2.500 dia80 avg64 min
		
			2.501-4.00 dia110 avg88 min
		
			4.001 dia and larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21030	Issued:1999-07-19
			Revised:2019-11-07


Rating	60, 80 deg C, 300 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pairs of groups of twistedsingles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable.Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of eachassembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. A 6 mil or heavier PVC, PE, ETFE or XLPE covering may be extruded over the conductor assembly.

Jacket	PUR
	major dia. in inches
	0.700 or less	30 mils min average	24 mils minimum at any point
	0.701-1.000 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min
	1.501-2.500 dia	80 avg	64 min
	2.501-4.00 dia	110 avg	88 min
	4.001 dia and larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of electronic equipment.