UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21033
                        
                            Issued:1999-04-20
                    
                            Revised:2012-07-26
                    
                            Style
                            21033
                        
                            Bonded flat ribbon cable.
                    
			Rating105 deg C, 60 Vac, Horizontal flame.
		
			Conductor40 AWG - 12 AWG Flat or round, material not specified. If flat, 1.0-10.0 mils thick, 10-100 mils wide.
		
			Insulation0.8 mil minimum Polyimide film bonded each side with 0.5 mil minimum epoxy resin adhesive. 10 mils minimum edge width and 3 mils minimum between conductors.
		
			AssemblyOne to 150 conductors straight or irregular parallel in one plane.
		
			ShieldOptional. Metal faced polyester tape. Drain wire optional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21033	Issued:1999-04-20
			Revised:2012-07-26


Rating	105 deg C, 60 Vac, Horizontal flame.

Conductor	40 AWG - 12 AWG Flat or round, material not specified. If flat, 1.0-10.0 mils thick, 10-100 mils wide.

Insulation	0.8 mil minimum Polyimide film bonded each side with 0.5 mil minimum epoxy resin adhesive. 10 mils minimum edge width and 3 mils minimum between conductors.

Assembly	One to 150 conductors straight or irregular parallel in one plane.

Shield	Optional. Metal faced polyester tape. Drain wire optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electronic equipment.