UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21043
                        
                            Issued:1999-07-23
                    
                            Revised:2012-03-22
                    
                            Style
                            21043
                        
                            Single Conductor with Extruded Insulation and Covering
                    
			Rating150 deg C, 300 Vac, Horizontal flame.
		
			Conductor36 AWG - 20 AWG, solid or stranded.
		
			InsulationExtruded ETFE, 9 mils minimum average thickness, 8 mils minimum thickness at any point.
		
			AssemblyTwo to six individually insulated conductors or groups of conductors cabled together into a round cable. Lay not specified.
		
			ShieldBraid (85 percent min coverage tinned or bare copper). Over the individual or groups of conductors.
		
			CoveringExtruded ETFE, or PVDF 9 mils minimum average thickness, 7 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseResistance wire for heating mats where the acceptability is determined by Underwriters Laboratories.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21043	Issued:1999-07-23
			Revised:2012-03-22


Rating	150 deg C, 300 Vac, Horizontal flame.

Conductor	36 AWG - 20 AWG, solid or stranded.

Insulation	Extruded ETFE, 9 mils minimum average thickness, 8 mils minimum thickness at any point.

Assembly	Two to six individually insulated conductors or groups of conductors cabled together into a round cable. Lay not specified.

Shield	Braid (85 percent min coverage tinned or bare copper). Over the individual or groups of conductors.

Covering	Extruded ETFE, or PVDF 9 mils minimum average thickness, 7 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Resistance wire for heating mats where the acceptability is determined by Underwriters Laboratories.