UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21047
                        
                            Issued:1999-09-29
                    
                            Revised:2017-08-24
                    
                            Style
                            21047
                        
                            Multi-conductor Cable with Extruded Non-Integral Jacket.
                    
			Rating75 deg C, 600 Vac, Cable flame.
		
			Conductor40 AWG - 2000 kcmil solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together.  The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified.  A barrier layer/or fillers are optional.  Manufacturer shall maintain a complete description of each assembly.  May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional.  Extruded PVC, 6 mil minimum thickness at any point.  May be over the conductor assembly.
		
			JacketExtruded PVC
		
			@Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch60 mils48 mils
		
			1.001-2.500 inch80 mils64 mils
		
			@ - Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21047	Issued:1999-09-29
			Revised:2017-08-24


Rating	75 deg C, 600 Vac, Cable flame.

Conductor	40 AWG - 2000 kcmil solid or stranded round, tinned or bare copper.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. Extruded PVC, 6 mil minimum thickness at any point. May be over the conductor assembly.

Jacket	Extruded PVC
	@Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	60 mils	48 mils
	1.001-2.500 inch	80 mils	64 mils
	@ - Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of electronic equipment.