UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21056
                        
                            Issued:1999-08-24
                    
                            Revised:2011-11-25
                    
                            Style
                            21056
                        
                            Bonded flat ribbon cable.
                    
			Rating105 deg C, 300 Vac, Horizontal flame.
		
			Conductor32 AWG - 16 AWG, solid or stranded.
		
			InsulationExtruded PVC, 9 mils minimum average thickness, 7 mil minimum thickness at any point.
		
			AssemblyTwo to 100 insulated singles or twisted pair or triads laid parallel in one plane, retained by heat or film melt bonded section at random intervals from two to 100 in apart, with or without PVC bands on one side of the cables in between the heat or film melt bonded sections minimum 1 inch width or PVC bands, approximately 0.1875 in.
		
			ShieldOptional.
		
			CoveringOptional. Extruded PVC, 5 mils minimum thickness at any point, 80 mils maximum thickness.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21056	Issued:1999-08-24
			Revised:2011-11-25


Rating	105 deg C, 300 Vac, Horizontal flame.

Conductor	32 AWG - 16 AWG, solid or stranded.

Insulation	Extruded PVC, 9 mils minimum average thickness, 7 mil minimum thickness at any point.

Assembly	Two to 100 insulated singles or twisted pair or triads laid parallel in one plane, retained by heat or film melt bonded section at random intervals from two to 100 in apart, with or without PVC bands on one side of the cables in between the heat or film melt bonded sections minimum 1 inch width or PVC bands, approximately 0.1875 in.

Shield	Optional.

Covering	Optional. Extruded PVC, 5 mils minimum thickness at any point, 80 mils maximum thickness.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.