UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21057
                        
                            Issued:1999-09-01
                    
                            Revised:2011-10-18
                    
                            Style
                            21057
                        
                            Bonded flat ribbon cable.
                    
			Rating90 deg C, 30 Vac, Horizontal flame.
		
			Conductor36 AWG - 26 AWG, solid or stranded.
		
			InsulationIntegral with Jacket. Extruded TPE, 3 mils min average.
		
			AssemblyTwo to 150 insulated singles or twisted pair or triads laid parallel in one plane, retained by heat or film melt bonded section at random intervals up to two to 100 in apart, or along the complete length of cable, with or without PVC bands on one side of the cables in between the heat or film melt bonded sections. Width of heat or film melt bonded sections min 1 inch. PVC film, Polyester, Polyester/PVC laminated film may be heat bonded on one or both sides of cable.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Electrical Equipment (such as Computers and Business Machines).
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21057	Issued:1999-09-01
			Revised:2011-10-18


Rating	90 deg C, 30 Vac, Horizontal flame.

Conductor	36 AWG - 26 AWG, solid or stranded.

Insulation	Integral with Jacket. Extruded TPE, 3 mils min average.

Assembly	Two to 150 insulated singles or twisted pair or triads laid parallel in one plane, retained by heat or film melt bonded section at random intervals up to two to 100 in apart, or along the complete length of cable, with or without PVC bands on one side of the cables in between the heat or film melt bonded sections. Width of heat or film melt bonded sections min 1 inch. PVC film, Polyester, Polyester/PVC laminated film may be heat bonded on one or both sides of cable.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Electrical Equipment (such as Computers and Business Machines).