UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21061
                        
                            Issued:1999-10-01
                    
                            Revised:2019-11-07
                    
                            Style
                            21061
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 300 Vac, Horizontal flame.
		
			Conductor36 AWG - 6 AWG solid or stranded round, Copper, Copper Clad Steel, or Copper Alloy, Bare or Coated (Tin or Silver)
		
			InsulationLabeled or complying with manufacturer's AWM Procedure. The designations of all styles of individual conductors used in making up the cable assembly shall be available.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with no more than three rows of single conductors or groups of conductors. the length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly or individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketExtruded PVC
		
			major dia. in inches
		
			0.700 or less30 mils min average24 mils minimum at any point
		
			0.701-1.000 dia45 avg36 min
		
			1.001-1.50 dia60 avg48 min
		
			1.501-2.500 dia80 avg64 min
		
			2.501-4.000 dia110 avg88 min
		
			4.001 dia and larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21061	Issued:1999-10-01
			Revised:2019-11-07


Rating	60 deg C, 300 Vac, Horizontal flame.

Conductor	36 AWG - 6 AWG solid or stranded round, Copper, Copper Clad Steel, or Copper Alloy, Bare or Coated (Tin or Silver)

Insulation	Labeled or complying with manufacturer's AWM Procedure. The designations of all styles of individual conductors used in making up the cable assembly shall be available.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with no more than three rows of single conductors or groups of conductors. the length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly or individual conductors or groups of conductors.

Shield	Optional.

Jacket	Extruded PVC
	major dia. in inches
	0.700 or less	30 mils min average	24 mils minimum at any point
	0.701-1.000 dia	45 avg	36 min
	1.001-1.50 dia	60 avg	48 min
	1.501-2.500 dia	80 avg	64 min
	2.501-4.000 dia	110 avg	88 min
	4.001 dia and larger	140 avg	112 min


Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring