UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21077
                        
                            Issued:2000-01-14
                    
                            Revised:2012-03-30
                    
                            Style
                            21077
                        
                            Multiple Conductor with Extruded Non-Integral Jacket
                    
			Rating80 deg C, 300 Vac, Cable flame
		
			Conductor30 AWG - 16 AWG solid or stranded, coated or bare.
		
			InsulationExtruded FEP, 5 mils minimum average thickness, 4 mils minimum thickness at any point
		
			Misc.Coaxial member - FEP Insulation. Overall average thickness 20 mils, 18 mils minimum thickness at any point, braided shield. FEP jacket, minimum average thickness 5 mils, 4 mils minimum thickness at any point.
		
			AssemblyTwo or more insulated singles or coaxial members and fillers in any combination may be twisted together to form flat, oval, or round cable, with optional covering, optional shield and overall jacket. Lay not specified.
		
			ShieldOptional
		
			CoveringOptional
		
			JacketExtruded PUR
		
			Diameter of core assembly under jacket (inches)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.250 or less1512
		
			0.251-0.7003024
		
			0.701-1.0006048
		
			1.001-1.5008064
		
			¿ Major diameter if cable is flat or oval
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral
		
			UseTest probe lead cable where the acceptability of the combination has been determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21077	Issued:2000-01-14
			Revised:2012-03-30


Rating	80 deg C, 300 Vac, Cable flame

Conductor	30 AWG - 16 AWG solid or stranded, coated or bare.

Insulation	Extruded FEP, 5 mils minimum average thickness, 4 mils minimum thickness at any point

Misc.	Coaxial member - FEP Insulation. Overall average thickness 20 mils, 18 mils minimum thickness at any point, braided shield. FEP jacket, minimum average thickness 5 mils, 4 mils minimum thickness at any point.

Assembly	Two or more insulated singles or coaxial members and fillers in any combination may be twisted together to form flat, oval, or round cable, with optional covering, optional shield and overall jacket. Lay not specified.

Shield	Optional

Covering	Optional

Jacket	Extruded PUR
	Diameter of core assembly under jacket (inches)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.250 or less	15	12
	0.251-0.700	30	24
	0.701-1.000	60	48
	1.001-1.500	80	64
	¿ Major diameter if cable is flat or oval

Standard	Appliance Wiring Material UL 758.

Marking	General

Use	Test probe lead cable where the acceptability of the combination has been determined by Underwriters Laboratories Inc.