UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21080
                        
                            Issued:2000-01-24
                    
                            Revised:2019-11-07
                    
                            Style
                            21080
                        
                            Multiconductor Cable with Extruded Non-integral Jacket.
                    
			Rating75 deg C, 300 Vac, Cable flame.
		
			Conductor30 AWG - 4/0 AWG solid or stranded round, tinned or bare copper. May include mixed AWG sizes.
		
			InsulationLabeled or complying with Manufacture's AWM Procedure.
		
			AssemblyTwo or more insulated singles twisted together. Lay not specified. Fillers and/or barrier layers optional. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional. A 6 mil, or heavier, FRPE covering may be extruded over conductor assembly.
		
			ShieldOptional.
		
			JacketFRPE
		
			dia. in inches
		
			0.700 or less25 mils min average20 mils minimum at any point
		
			0.701-1.00 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min
		
			1.501-2.500 dia80 avg64 min
		
			2.501-4.000 dia110 avg88 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances and external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21080	Issued:2000-01-24
			Revised:2019-11-07


Rating	75 deg C, 300 Vac, Cable flame.

Conductor	30 AWG - 4/0 AWG solid or stranded round, tinned or bare copper. May include mixed AWG sizes.

Insulation	Labeled or complying with Manufacture's AWM Procedure.

Assembly	Two or more insulated singles twisted together. Lay not specified. Fillers and/or barrier layers optional. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional. A 6 mil, or heavier, FRPE covering may be extruded over conductor assembly.

Shield	Optional.

Jacket	FRPE
	dia. in inches
	0.700 or less	25 mils min average	20 mils minimum at any point
	0.701-1.00 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min
	1.501-2.500 dia	80 avg	64 min
	2.501-4.000 dia	110 avg	88 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances and external interconnection of electronic equipment.