UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21085
                        
                            Issued:2000-04-10
                    
                            Revised:2019-11-07
                    
                            Style
                            21085
                        
                            Multiple-conductor cable with non-integral jacket
                    
			Rating105 deg C, 600 Vac, FT2 flame.
		
			Conductor14-10 AWG stranded copper.
		
			InsulationPVC
		
			14-12 AWG conductor size15 mils min average13 mils minimum at any point
		
			10 AWG20 avg18 min
		
			Nylon Jacket - 4 mils min over the PVC insulation.
		
			AssemblyThree insulated conductors, same as type ST, laid paralled forming a flat cable, with nylon jacket and overall jacket. A web, min 40 mils thick and 100 mils high.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketTPE
		
			conductor size
		
			14 AWG60 mils min average48 mils minimum at any point
		
			12-10 AWG75 avg60 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseIn the manufacture of Special Use Cord Sets where extra-hard-usage cord is required and where the acceptability of the combination is determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21085	Issued:2000-04-10
			Revised:2019-11-07


Rating	105 deg C, 600 Vac, FT2 flame.

Conductor	14-10 AWG stranded copper.

Insulation	PVC
	14-12 AWG conductor size	15 mils min average	13 mils minimum at any point
	10 AWG	20 avg	18 min
	Nylon Jacket - 4 mils min over the PVC insulation.

Assembly	Three insulated conductors, same as type ST, laid paralled forming a flat cable, with nylon jacket and overall jacket. A web, min 40 mils thick and 100 mils high.

Shield	Optional.

Covering	Optional.

Jacket	TPE
	conductor size
	14 AWG	60 mils min average	48 mils minimum at any point
	12-10 AWG	75 avg	60 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	In the manufacture of Special Use Cord Sets where extra-hard-usage cord is required and where the acceptability of the combination is determined by Underwriters Laboratories Inc.