UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21086
                        
                            Issued:2000-03-01
                    
                            Revised:2011-12-21
                    
                            Style
                            21086
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket.
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG min. , material not specified.
		
			InsulationExtruded solid ETFE, FRPE, PE, XLPE, XLETFE, XLFRPE, or extruded foamed ETFE, FRPE, PE, XLPE, XLETFE, XLFRPE, 3 mils minimum at any point.
		
			AssemblyTwo to five conductors with shield. May include barrier layer or fillers.
		
			ShieldRequired.
		
			CoveringOptional. Extruded solid PE or FRPE, extruded foamed PE or FRPE, 3 mils minimum at any point.
		
			JacketExtruded PVC, 5 mils min average, 3 mils minimum at any point; or extruded ETFE, 2 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21086	Issued:2000-03-01
			Revised:2011-12-21


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG min. , material not specified.

Insulation	Extruded solid ETFE, FRPE, PE, XLPE, XLETFE, XLFRPE, or extruded foamed ETFE, FRPE, PE, XLPE, XLETFE, XLFRPE, 3 mils minimum at any point.

Assembly	Two to five conductors with shield. May include barrier layer or fillers.

Shield	Required.

Covering	Optional. Extruded solid PE or FRPE, extruded foamed PE or FRPE, 3 mils minimum at any point.

Jacket	Extruded PVC, 5 mils min average, 3 mils minimum at any point; or extruded ETFE, 2 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.