UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21087
                        
                            Issued:2000-03-22
                    
                            Revised:2019-11-07
                    
                            Style
                            21087
                        
                            Multiple-Conductor Cable using Non-Integral Jacket.
                    
			Rating60 deg C, 150 Vac, Horizontal flame, Cable Flame.
		
			Conductor36 AWG - 9 AWG solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors laid parallel or cabled together to form a flat, oval or round cable. Conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. The use of a barrier layer and/or fillers is optional. Cable may contain Labeled Flat Ribbon Style AWM which may be rolled or spiralled and formed around fillers or bunched singles. Fillers and/or tape wrap or extruded covering may be used.
		
			ShieldOptional. The shield may be over one or more of the insulated conductors or applied between the conductor assembly and the optional covering.
		
			CoveringOptional. A 5 mil or heavier PVC covering may be extruded over one or more groups of conductors.
		
			JacketExtruded FRPE
		
			major dia. in inches
		
			0.700 or less30 mils min average24 mils minimum at any point
		
			1.001-1.50 dia60 avg48 min
		
			1.501-2.500 dia80 avg64 min
		
			2.501-4.000 dia110 avg88 min
		
			4.001 dia and larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21087	Issued:2000-03-22
			Revised:2019-11-07


Rating	60 deg C, 150 Vac, Horizontal flame, Cable Flame.

Conductor	36 AWG - 9 AWG solid or stranded round, tinned or bare copper.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors laid parallel or cabled together to form a flat, oval or round cable. Conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. The use of a barrier layer and/or fillers is optional. Cable may contain Labeled Flat Ribbon Style AWM which may be rolled or spiralled and formed around fillers or bunched singles. Fillers and/or tape wrap or extruded covering may be used.

Shield	Optional. The shield may be over one or more of the insulated conductors or applied between the conductor assembly and the optional covering.

Covering	Optional. A 5 mil or heavier PVC covering may be extruded over one or more groups of conductors.

Jacket	Extruded FRPE
	major dia. in inches
	0.700 or less	30 mils min average	24 mils minimum at any point
	1.001-1.50 dia	60 avg	48 min
	1.501-2.500 dia	80 avg	64 min
	2.501-4.000 dia	110 avg	88 min
	4.001 dia and larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of electronic equipment.