UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21089
                        
                            Issued:2000-05-03
                    
                            Revised:2011-08-29
                    
                            Style
                            21089
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating75 deg C, 600 Vac, Cable flame.
		
			Conductor30 AWG - 4/0 AWG solid or stranded.
		
			InsulationLabeled or complying with Manufacture's AWM Procedure.
		
			AssemblyTwo or more insulated singles twisted together. Lay not specified. Fillers and/or barrier layers optional. Manufacturer shall maintain a complete description of each assembly.  May include mixed AWG sizes.
		
			ShieldOptional.
		
			CoveringOptional. A 6 mils or heavier extruded FRPE covering may be extruded over conductor assembly.
		
			JacketExtruded FRPE.
		
			Diameter of core assembly under jacketMinimum average thicknesMinimum thicknes at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501 inch and larger80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances and external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21089	Issued:2000-05-03
			Revised:2011-08-29


Rating	75 deg C, 600 Vac, Cable flame.

Conductor	30 AWG - 4/0 AWG solid or stranded.

Insulation	Labeled or complying with Manufacture's AWM Procedure.

Assembly	Two or more insulated singles twisted together. Lay not specified. Fillers and/or barrier layers optional. Manufacturer shall maintain a complete description of each assembly. May include mixed AWG sizes.

Shield	Optional.

Covering	Optional. A 6 mils or heavier extruded FRPE covering may be extruded over conductor assembly.

Jacket	Extruded FRPE.
	Diameter of core assembly under jacket	Minimum average thicknes	Minimum thicknes at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501 inch and larger	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances and external interconnection of electronic equipment.