UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21092
                        
                            Issued:2000-05-18
                    
                            Revised:2011-10-26
                    
                            Style
                            21092
                        
                            Multiple-conductor cable using non-integral covering.
                    
			Rating150, 200 deg C, 1000 Vac, Horizontal flame.
		
			Conductor30 AWG - 10 AWG, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure, 20 mils min average, 18 mils minimum at any point.
		
			AssemblyTwo to twenty insulated singles, cabled together, with or without a shield, barrier layer and covering forming a round or oval cable. May include mixed AWG sizes. Manufacturer shall maintain a record of all singles used in each cable.
		
			ShieldOptional.
		
			CoveringInner layer - Optional-PTFE/GLASS Tape.;
Outer layer - Spiral wrapped, Bonded PTFE Tape, 7 mils min at any point or a Polyaramid or Glass Braid with a Silicone or acrylic based emulsion finished.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21092	Issued:2000-05-18
			Revised:2011-10-26


Rating	150, 200 deg C, 1000 Vac, Horizontal flame.

Conductor	30 AWG - 10 AWG, solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure, 20 mils min average, 18 mils minimum at any point.

Assembly	Two to twenty insulated singles, cabled together, with or without a shield, barrier layer and covering forming a round or oval cable. May include mixed AWG sizes. Manufacturer shall maintain a record of all singles used in each cable.

Shield	Optional.

Covering	Inner layer - Optional-PTFE/GLASS Tape.; Outer layer - Spiral wrapped, Bonded PTFE Tape, 7 mils min at any point or a Polyaramid or Glass Braid with a Silicone or acrylic based emulsion finished.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.