UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21094
                        
                            Issued:2000-05-25
                    
                            Revised:2012-05-30
                    
                            Style
                            21094
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating105 deg C, 300 Vac, Cable flame. Optional - 60 or 80 deg C Oil, Optional - Gasoline Resistant.
		
			Conductor26 AWG - 18 AWG, solid or stranded.
		
			InsulationLabeled or complying with Manufacture's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, all groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional. tinned soft iron shield applied as a braid with an overall Polyester tape wrap.
		
			JacketExtruded PVC.
		
			Diameter of core assembly under jacketMiniumum average thicknessMinimum thickness at any point
		
			0.350 inch or less30 mils24 mils
		
			0.351-0.450 inch40 mils32 mils
		
			0.451-0.550 inch50 mils40 mils
		
			0.551-0.750 inch60 mils48 mils
		
			0.751-0.950 inch70 mils56 mils
		
			0.951-1.200 inch80 mils64 mils
		
			CoveringExtruded Nylon.
		
			Diameter of core assembly under jacketMinimum thickness at any point
		
			0.350 or less inch4 mils
		
			0.351-0.450 inch5 mils
		
			0.451-0.550 inch6 mils
		
			0.551-0.750 inch7 mils
		
			0.751-0.950 inch8 mils
		
			0.951-1.200 inch9 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.T ags may indicate the following:"Suitable for immersion in gasoline; gasoline vapor; and 60 deg C or 80 deg C in oil".
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21094	Issued:2000-05-25
			Revised:2012-05-30


Rating	105 deg C, 300 Vac, Cable flame. Optional - 60 or 80 deg C Oil, Optional - Gasoline Resistant.

Conductor	26 AWG - 18 AWG, solid or stranded.

Insulation	Labeled or complying with Manufacture's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, all groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional. tinned soft iron shield applied as a braid with an overall Polyester tape wrap.

Jacket	Extruded PVC.
	Diameter of core assembly under jacket	Miniumum average thickness	Minimum thickness at any point
	0.350 inch or less	30 mils	24 mils
	0.351-0.450 inch	40 mils	32 mils
	0.451-0.550 inch	50 mils	40 mils
	0.551-0.750 inch	60 mils	48 mils
	0.751-0.950 inch	70 mils	56 mils
	0.951-1.200 inch	80 mils	64 mils

Covering	Extruded Nylon.
	Diameter of core assembly under jacket	Minimum thickness at any point
	0.350 or less inch	4 mils
	0.351-0.450 inch	5 mils
	0.451-0.550 inch	6 mils
	0.551-0.750 inch	7 mils
	0.751-0.950 inch	8 mils
	0.951-1.200 inch	9 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.T ags may indicate the following:"Suitable for immersion in gasoline; gasoline vapor; and 60 deg C or 80 deg C in oil".