UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21096
                        
                            Issued:2000-05-25
                    
                            Revised:2019-11-07
                    
                            Style
                            21096
                        
                            Multiple conductor cable using extruded non-integral jacket
                    
			Rating60 deg C, 600 Vac, Cable flame.
		
			Conductor40 AWG - 4 AWG solid or stranded.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional, a 6 mil or heavier extruded PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC
		
			dia. in inches
		
			0.425 or less30 mils min average24 mils min at any point
		
			0.426-0.700 dia6048
		
			0.701-2.500 dia8064
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal or external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21096	Issued:2000-05-25
			Revised:2019-11-07


Rating	60 deg C, 600 Vac, Cable flame.

Conductor	40 AWG - 4 AWG solid or stranded.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional, a 6 mil or heavier extruded PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PVC
	dia. in inches
	0.425 or less	30 mils min average	24 mils min at any point
	0.426-0.700 dia	60	48
	0.701-2.500 dia	80	64

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal or external interconnection of electronic equipment.