UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21098
                        
                            Issued:2000-06-15
                    
                            Revised:2019-11-07
                    
                            Style
                            21098
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket
                    
			Rating90 deg C, 600 Vac, Cable flame, Oil Resistant 60 deg C or 80 deg C.
		
			Conductor40 AWG min. solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketPVC
		
			dia. in inches
		
			0.700 or less30 mils min average24 mils minimum at any point
		
			0.701-1.00 dia60 avg48 min
		
			1.001-1.500 dia80 avg64 min
		
			1.501-2.500 dia110 avg88 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of electronic equipment. Appliances where exposed to oil at a temperature not exceeding 60 deg C or 80 deg C, whichever is applicable.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21098	Issued:2000-06-15
			Revised:2019-11-07


Rating	90 deg C, 600 Vac, Cable flame, Oil Resistant 60 deg C or 80 deg C.

Conductor	40 AWG min. solid or stranded round, tinned or bare copper.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Jacket	PVC
	dia. in inches
	0.700 or less	30 mils min average	24 mils minimum at any point
	0.701-1.00 dia	60 avg	48 min
	1.001-1.500 dia	80 avg	64 min
	1.501-2.500 dia	110 avg	88 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of electronic equipment. Appliances where exposed to oil at a temperature not exceeding 60 deg C or 80 deg C, whichever is applicable.