UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21100
                        
                            Issued:2000-06-27
                    
                            Revised:2011-10-20
                    
                            Style
                            21100
                        
                            Multiple conductor cable using non-integral jacket.
                    
			Rating80 deg C, 30 Vac, Cable flame (construction A), Horizontal flame (construction B).
		
			Conductor40 AWG minimum.
		
			InsulationLabeled or complying with Manufacture's AWM Procedure having a minimum rating of 80 deg C, 30 V.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the insulated conductors are not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketFRPE.
		
			Dia. under jacketMinimum average for Construction A External UseMinimum at any point for Construction A External UseMinimum average for Construction B Internal UseMinimum at any point for Construction B Internal Use
		
			0.350 inch or less20 mils17 mils15 mils12 mils
		
			0.351-0.700 inch30 mils24 mils30 mils24 mils
		
			0.701-1.000 inch40 mils36 mils40 mils36 mils
		
			1.001-1.500 inch54 mils48 mils54 mils48 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseConstruction A: Internal wiring or external interconnection of electronic equipment in Class 2 circuits only.  Construction B: Internal wiring of electronic equipment in Class 2 circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21100	Issued:2000-06-27
			Revised:2011-10-20


Rating	80 deg C, 30 Vac, Cable flame (construction A), Horizontal flame (construction B).

Conductor	40 AWG minimum.

Insulation	Labeled or complying with Manufacture's AWM Procedure having a minimum rating of 80 deg C, 30 V.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the insulated conductors are not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Jacket	FRPE.
	Dia. under jacket	Minimum average for Construction A External Use	Minimum at any point for Construction A External Use	Minimum average for Construction B Internal Use	Minimum at any point for Construction B Internal Use
	0.350 inch or less	20 mils	17 mils	15 mils	12 mils
	0.351-0.700 inch	30 mils	24 mils	30 mils	24 mils
	0.701-1.000 inch	40 mils	36 mils	40 mils	36 mils
	1.001-1.500 inch	54 mils	48 mils	54 mils	48 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Construction A: Internal wiring or external interconnection of electronic equipment in Class 2 circuits only. Construction B: Internal wiring of electronic equipment in Class 2 circuits only.