UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21102
                        
                            Issued:2000-07-14
                    
                            Revised:2011-08-11
                    
                            Style
                            21102
                        
                            Multiple Conductor with Extruded Insulation and Extruded Non-Integral Jacket
                    
			Rating60 deg C, 30 Vac, Horizontal flame
		
			Conductor40 AWG - 2000 kcmil
		
			InsulationExtruded Foamed or Solid PVC, 4 mils minimum average thickness
		
			AssemblyTwo conductors or two groups of twisted singles (thirty conductors max.) may be laid parallel to form flat cable, or two or more twisted singles or groups of twisted singles cabled together. Fillers and barrier layer optional.
		
			ShieldOptional
		
			CoveringOptional. Extruded PVC, Polyamide, ETFE, or Polyester 2 mils minimum thickness at any point, or lacquered braid. May be irradiated.
		
			JacketExtruded PVC, 5 mils minimum average thickness, 3 mils minimum thickness at any point
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral
		
			UseInternal Wiring of Class 2 circuits in Electronic Equipment
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21102	Issued:2000-07-14
			Revised:2011-08-11


Rating	60 deg C, 30 Vac, Horizontal flame

Conductor	40 AWG - 2000 kcmil

Insulation	Extruded Foamed or Solid PVC, 4 mils minimum average thickness

Assembly	Two conductors or two groups of twisted singles (thirty conductors max.) may be laid parallel to form flat cable, or two or more twisted singles or groups of twisted singles cabled together. Fillers and barrier layer optional.

Shield	Optional

Covering	Optional. Extruded PVC, Polyamide, ETFE, or Polyester 2 mils minimum thickness at any point, or lacquered braid. May be irradiated.

Jacket	Extruded PVC, 5 mils minimum average thickness, 3 mils minimum thickness at any point

Standard	Appliance Wiring Material UL 758.

Marking	General

Use	Internal Wiring of Class 2 circuits in Electronic Equipment