UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21105
                        
                            Issued:2000-07-28
                    
                            Revised:2011-10-17
                    
                            Style
                            21105
                        
                            Multiconductor Cable with Non-Integral Jacket.
                    
			Rating200 deg C, 1000 Vac, Horizontal flame.
		
			Conductor40 AWG - 15 AWG solid or stranded round. Or Litz cable magnet wire, R/C (OBMW2) magnet wire rated at minimum 200 C.  Each single magnet wire strand is cabled together with other magnet wire strands to form a conductor.  AWG size to be determined by the Resistance Test.
		
			InsulationFEP, 9 mils min average, 8 mils min at any point.
		
			AssemblyTwo or more insulated singles in any combination may be twisted together to form flat, oval or round cable. Lay not specified. A barrier layer and/or fillers are optional. Each single magnet wire strand is cabled together with other magnet wire strands to form a conductor. AWG size to be determined by the Resistance Test. For insulation, if is three layers, 3 mils min average; two layers, 4.5 mils min averag. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG sizes.
		
			ShieldOptional.
		
			BraidOptional. Silicone impregnated glass braid 0.015 in. thick.
		
			JacketExtruded FEP, 10 mils min average thickness, 8 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances. Wires employing Litz conductors shall be plainly marked on the tag or reel as follows: "Litz conductors are manufactured using solderable magnet wire."
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21105	Issued:2000-07-28
			Revised:2011-10-17


Rating	200 deg C, 1000 Vac, Horizontal flame.

Conductor	40 AWG - 15 AWG solid or stranded round. Or Litz cable magnet wire, R/C (OBMW2) magnet wire rated at minimum 200 C. Each single magnet wire strand is cabled together with other magnet wire strands to form a conductor. AWG size to be determined by the Resistance Test.

Insulation	FEP, 9 mils min average, 8 mils min at any point.

Assembly	Two or more insulated singles in any combination may be twisted together to form flat, oval or round cable. Lay not specified. A barrier layer and/or fillers are optional. Each single magnet wire strand is cabled together with other magnet wire strands to form a conductor. AWG size to be determined by the Resistance Test. For insulation, if is three layers, 3 mils min average; two layers, 4.5 mils min averag. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG sizes.

Shield	Optional.

Braid	Optional. Silicone impregnated glass braid 0.015 in. thick.

Jacket	Extruded FEP, 10 mils min average thickness, 8 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances. Wires employing Litz conductors shall be plainly marked on the tag or reel as follows: "Litz conductors are manufactured using solderable magnet wire."