UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21111
                        
                            Issued:2000-08-08
                    
                            Revised:2012-05-29
                    
                            Style
                            21111
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 30 Vac, Horizontal, Cable flame.
		
			Conductor50 AWG - 2000 kcmil. Solid or stranded round.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size. Two or more jacketed members may be bonded together forming a flat cable.
		
			ShieldOptional.
		
			CoveringOptional. A 10 mil or heavier extruded THV covering may be extruded over the conductor assembly.
		
			JacketExtruded THV, Internal use - 10 mils minimum average thickness, 8 mils minimum thickness at any point; Extruded THV, External use -
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21111	Issued:2000-08-08
			Revised:2012-05-29


Rating	80 deg C, 30 Vac, Horizontal, Cable flame.

Conductor	50 AWG - 2000 kcmil. Solid or stranded round.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size. Two or more jacketed members may be bonded together forming a flat cable.

Shield	Optional.

Covering	Optional. A 10 mil or heavier extruded THV covering may be extruded over the conductor assembly.

Jacket	Extruded THV, Internal use - 10 mils minimum average thickness, 8 mils minimum thickness at any point; Extruded THV, External use -
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment.