UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21115
                        
                            Issued:2000-08-30
                    
                            Revised:2019-11-07
                    
                            Style
                            21115
                        
                            Multiple-Conductor Cable using Non-Integral Jacket.
                    
			Rating75, 80 deg C, 1000 Vac, Horizontal flame.
		
			Conductor30 AWG - 4/0 AWG solid or stranded round, tinned or bare copper. May include mixed AWG sizes.
		
			InsulationLabeled or complying with Manufacture's AWM Procedure.
		
			AssemblyTwo or more insulated singles twisted together. Lay not specified. Fillers, Shields, Braids and/or barrier layers description of each assembly.
		
			CoveringOptional. A 6 mil or heavier FRPE covering may be extruded over the conductor assembly.
		
			JacketExtruded FRPE
		
			dia. in inches
		
			0.400 or less25 mils min average20 mils minimum at any point
		
			0.401-0.700 dia35 avg28 min
		
			0.701-1.000 dia48 avg38 min
		
			1.001-1.500 dia64 avg51 min
		
			1.501-2.500 dia60 avg48 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21115	Issued:2000-08-30
			Revised:2019-11-07


Rating	75, 80 deg C, 1000 Vac, Horizontal flame.

Conductor	30 AWG - 4/0 AWG solid or stranded round, tinned or bare copper. May include mixed AWG sizes.

Insulation	Labeled or complying with Manufacture's AWM Procedure.

Assembly	Two or more insulated singles twisted together. Lay not specified. Fillers, Shields, Braids and/or barrier layers description of each assembly.

Covering	Optional. A 6 mil or heavier FRPE covering may be extruded over the conductor assembly.

Jacket	Extruded FRPE
	dia. in inches
	0.400 or less	25 mils min average	20 mils minimum at any point
	0.401-0.700 dia	35 avg	28 min
	0.701-1.000 dia	48 avg	38 min
	1.001-1.500 dia	64 avg	51 min
	1.501-2.500 dia	60 avg	48 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances.