UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21116
                        
                            Issued:2000-09-06
                    
                            Revised:2011-10-06
                    
                            Style
                            21116
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60 deg C, 150 Vac, 300 Vac peak, Cable flame.
		
			Conductor33 AWG - 18 AWG, solid or stranded, round or tinsel.
		
			InsulationExtruded PE, 5 mils minimum average thickness, 4 mils minimum thickness at any point.
		
			AssemblyTwo or more insulated conductors, lay not specified.
		
			ShieldRequired.
		
			JacketExtruded XLPE
		
			Dia. under jacket in inchesMinimum average thicknessMinimum thickness at any point
		
			0.350 inch or less25 mils20 mils
		
			0.351-0.700 inch30 mils24 mils
		
			0.701-1.000 inch40 mils36 mils
		
			1.001-1.500 inch54 mils48 mils
		
			CoveringOptional.  Extruded PE, 2 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseHandset Wire or Telephone Cord for Subscriber Sets, or Internal or External Interconnecting Cable of Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21116	Issued:2000-09-06
			Revised:2011-10-06


Rating	60 deg C, 150 Vac, 300 Vac peak, Cable flame.

Conductor	33 AWG - 18 AWG, solid or stranded, round or tinsel.

Insulation	Extruded PE, 5 mils minimum average thickness, 4 mils minimum thickness at any point.

Assembly	Two or more insulated conductors, lay not specified.

Shield	Required.

Jacket	Extruded XLPE
	Dia. under jacket in inches	Minimum average thickness	Minimum thickness at any point
	0.350 inch or less	25 mils	20 mils
	0.351-0.700 inch	30 mils	24 mils
	0.701-1.000 inch	40 mils	36 mils
	1.001-1.500 inch	54 mils	48 mils

Covering	Optional. Extruded PE, 2 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Handset Wire or Telephone Cord for Subscriber Sets, or Internal or External Interconnecting Cable of Electronic Equipment.