UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21118
                        
                            Issued:2000-10-13
                    
                            Revised:2011-10-12
                    
                            Style
                            21118
                        
                            Multi-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 30 Vac, Horizontal flame for Use No. 1, Cable flame for Use No. 2.
		
			Conductor50 AWG minimum, solid or stranded.
		
			InsulationLabeled or complies with manufacturer's Procedure with minimum rating 80 C, 30 V.
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together or groups may be laid parallel to form flat, oval, or round cables. May use same or mixed AWG. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional. Extruded PVC, 13 mils minimum at any point or a helically or longitudinally applied PTFE tape of 1 mil nominal thickness (lap not specified).
		
			ShieldOptional. May be over one or more of the insulated conductors or applied over the assembly.
		
			JacketExtruded FRPE.
		
			Dia of cable under jacket in inchesMinimum average milsMinimum at any point mils
		
			0.250 or less1512
		
			0.251-0.3502218
		
			0.351-0.4243024
		
			0.425-0.7006048
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseUse No. 1: Internal wiring in Class 2 circuits of electronic equipment where each end is terminated in connectors. Use No. 2: Internal wiring in Class 2 circuits of electronic equipment or external interconnection in Class 2 circuits of electronic equipment where not routed along walls, floors, or other abuse areas.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21118	Issued:2000-10-13
			Revised:2011-10-12


Rating	80 deg C, 30 Vac, Horizontal flame for Use No. 1, Cable flame for Use No. 2.

Conductor	50 AWG minimum, solid or stranded.

Insulation	Labeled or complies with manufacturer's Procedure with minimum rating 80 C, 30 V.

Assembly	Two or more twisted singles or groups of twisted singles twisted together or groups may be laid parallel to form flat, oval, or round cables. May use same or mixed AWG. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional. Extruded PVC, 13 mils minimum at any point or a helically or longitudinally applied PTFE tape of 1 mil nominal thickness (lap not specified).

Shield	Optional. May be over one or more of the insulated conductors or applied over the assembly.

Jacket	Extruded FRPE.
	Dia of cable under jacket in inches	Minimum average mils	Minimum at any point mils
	0.250 or less	15	12
	0.251-0.350	22	18
	0.351-0.424	30	24
	0.425-0.700	60	48

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Use No. 1: Internal wiring in Class 2 circuits of electronic equipment where each end is terminated in connectors. Use No. 2: Internal wiring in Class 2 circuits of electronic equipment or external interconnection in Class 2 circuits of electronic equipment where not routed along walls, floors, or other abuse areas.